Publicaciones científicas

2023

  1. Analysis of Current Situation with Renewable Energy in RussiaLecture Notes in Networks and Systems
  2. Experimental adjustment of the turbulent Schmidt number to model the evaporation rate of swimming pools in CFD programmesCase Studies in Thermal Engineering, Vol. 41
  3. Air-cooled condensers optimization for novel Ultra-Low Charge ammonia chillers to achieve competitive packaged unitsApplied Thermal Engineering, Vol. 219
  4. A new practical approach to design a Phase Change Material-Water longitudinally finned tube heat exchangerApplied Thermal Engineering, Vol. 221

2022

  1. Activity and efficiency trends for the residential sector across countriesEnergy and Buildings, Vol. 273
  2. A review on buildings energy information: Trends, end-uses, fuels and driversEnergy Reports, Vol. 8, pp. 626-637
  3. Thermodynamic analysis of auto-cascade refrigeration cycles, with and without ejector, for ultra low temperature freezing using a mixture of refrigerants R600a and R1150Applied Thermal Engineering, Vol. 200
  4. Influence of Wood Properties and Building Construction on Energy Demand, Thermal Comfort and Start-Up Lag Time of Radiant Floor Heating SystemsApplied Sciences (Switzerland), Vol. 12, Núm. 5
  5. Effect of Wood Properties and Building Construction on Thermal Performance of Radiant Floor Heating WorldwideApplied Sciences (Switzerland), Vol. 12, Núm. 11

2021

  1. Thermoeconomic analysis of CO2 Ejector-Expansion Refrigeration Cycle (EERC) for low-temperature refrigeration in warm climatesApplied Thermal Engineering, Vol. 188
  2. Thermodynamic analysis of the optimal operating conditions for a two-stage CO2 refrigeration unit in warm climates with and without ejectorApplied Thermal Engineering, Vol. 185
  3. Revisiting Kaya Identity to define an Emissions Indicators PyramidJournal of Cleaner Production, Vol. 317
  4. Performance analysis of natural convection correlations for spheres at high Rayleigh numbersInternational Journal of Thermal Sciences, Vol. 168
  5. Optimal renovation strategies through life-cycle analysis in a pilot building located in a mild mediterranean climateApplied Sciences (Switzerland), Vol. 11, Núm. 4, pp. 1-25
  6. Experimental performance analysis of a novel ultra-low charge ammonia air condensed chillerApplied Thermal Engineering, Vol. 195
  7. Energy-efficient envelope design for apartment blocks—Case study of a residential building in SpainApplied Sciences (Switzerland), Vol. 11, Núm. 1, pp. 1-16
  8. Energy, emissions and economic impact of the new nZEB regulatory framework on residential buildings renovation: Case study in southern SpainJournal of Building Engineering, Vol. 42
  9. Assessing the impact of courtyards in cooling energy demand in buildingsJournal of Cleaner Production, Vol. 320
  10. A cross-country review on energy efficiency driversApplied Energy, Vol. 289

2020

  1. The Analysis of Multi-Apartment Residential Buildings Energy Consumption in RussiaE3S Web of Conferences
  2. Influencia del marco regulador en el consumo energético de edificios residenciales. Estudio de casos en la Comunidad Autónoma de AndalucíaComunicaciones presentadas al XXIV Congreso Internacional de Ingeniería de Proyectos: celebrado en Alcoy del 7 al 9 de julio de 2020
  3. Experimental performance analysis of an air condensed ammonia chiller with critical chargeRefrigeration Science and Technology
  4. A review on buildings energy consumption in Russia: Educational buildingsE3S Web of Conferences
  5. Experiencias y desafíos actuales en relación al desarrollo de proyectos internacionales de ingeniería térmica y energías renovablesDiseño, energía y digitalización en proyectos de I D+i (Editorial UCA), pp. 76-113
  6. Transformación de las viviendas de la burbuja inmobiliaria en edificios de consumo energético casi nulo: estudio de casosRevista DYNA, Vol. 95, Núm. 6, pp. 674-680
  7. The use of artificial neural networks for modelling pitting corrosion behaviour of en 1.4404 stainless steel in marine environment: Data analysis and new developmentsCorrosion Reviews, Vol. 38, Núm. 4, pp. 339-353
  8. Solar gain mitigation in ventilated tiled roofs by using phase change materialsInternational Journal of Low-Carbon Technologies, Vol. 15, Núm. 3, pp. 434-442
  9. On the energy potential of daytime radiative cooling for urban heat island mitigationSolar Energy, Vol. 208, pp. 430-444
  10. Numerical and experimental study of the heat transfer and hydraulic performance of solar air heaters with different baffle positionsRenewable Energy, Vol. 155, pp. 1231-1244
  11. Enhanced CFD-based approach to calculate the evaporation rate in swimming poolsScience and Technology for the Built Environment, Vol. 27, Núm. 4, pp. 524-532
  12. Energy analysis of a dual-source heat pump coupled with phase change materialsEnergies, Vol. 13, Núm. 11
  13. Effect of sky discretization for shading device calculation on building energy performance simulationsEnergies, Vol. 16, Núm. 3
  14. Analyzing the urban heat Island: Comprehensive methodology for data gathering and optimal design of mobile transectsSustainable Cities and Society, Vol. 55

2019

  1. Eficiencia energética de las viviendas de la burbuja inmobiliaria. Estudio de casoComunicaciones presentadas al XXIII Congreso Internacional de Ingeniería de Proyectos: celebrado en Málaga del 10 al 12 de julio de 2019
  2. Systematic simplified simulation methodology for deep energy retrofitting towards NZE targets using life cycle energy assessmentEnergies, Vol. 12, Núm. 16
  3. Seasonal performance optimisation of thermally driven ejector cooling cycles working with R134aInternational Journal of Refrigeration, Vol. 104, pp. 356-366
  4. Practical approaches to assess thermal performance of a finned heat sink prototype for low concentration photovoltaics (LCPV) systems: Analytical correlations vs CFD modellingApplied Thermal Engineering, Vol. 156, pp. 220-229
  5. Experimental validation of a hybrid model for vertical ground heat exchangers under on-off operation conditionsEnergy and Buildings, Vol. 204
  6. Efficient goods inspection demand at ports: a comparative forecasting approachInternational Transactions in Operational Research, Vol. 26, Núm. 5, pp. 1906-1934
  7. A two-stage forecasting approach for short-term intermodal freight predictionInternational Transactions in Operational Research, Vol. 26, Núm. 2, pp. 642-666
  8. A support vector machine-based ensemble algorithm for pitting corrosion modeling of EN 1.4404 stainless steel in sodium chloride solutionsMaterials and Corrosion, Vol. 70, Núm. 1, pp. 19-27

2018

  1. Transcritical single-phase CO2 ejector geometry optimisation by means of a multi-objective evolutionary algorithm and CFD modelsRefrigeration Science and Technology
  2. Evaluation of the computation times for direct and iterative resolution methods of MTJ library matrices applied in a thermal simulation systemCommunications in Computer and Information Science
  3. Single-phase ejector geometry optimisation by means of a multi-objective evolutionary algorithm and a surrogate CFD modelEnergy, Vol. 164, pp. 46-64
  4. Proyecto europeo de rehabilitación energética ReCO2ST: Un edificio de Cádiz, entre los primeros EEC de Europa adaptado a clima cálidoCIC: publicación mensual sobre arquitectura y construcción, Núm. 545, pp. 40-43
  5. MedZEB: A new holistic approach for the deep energy retrofitting of residential buildingsTECHNE, Vol. SpecialSeries1, pp. 127-133
  6. Experimental test for the estimation of the evaporation rate in indoor swimming pools: Validation of a new CFD-based simulation methodologyBuilding and Environment, Vol. 138, pp. 293-299
  7. Does energy efficiency matter to real estate-consumers? Survey evidence on willingness to pay from a cost-optimal analysis in the context of a developing countryEnergy for Sustainable Development, Vol. 45, pp. 110-123
  8. Decision-making approach: A simplified model for energy performance evaluation of photovoltaic modulesEnergy Conversion and Management, Vol. 177, pp. 350-362
  9. An economic, energy, and environmental analysis of PV/Micro-CHP hybrid systems: A case study of a tertiary buildingSustainability (Switzerland), Vol. 10, Núm. 11
  10. 3D internal forced convection heat-transfer correlations from CFD for building performance simulationEngineering Applications of Computational Fluid Mechanics, Vol. 12, Núm. 1, pp. 553-566

2017

  1. Influencia de los parámetros que determinan los caudales de ventilación sobre la demanda energética en edificios residencialesComunicaciones presentadas al XXI Congreso Internacional de Ingeniería de Proyectos: celebrado en Cádiz del 12 al 14 de julio de 2017
  2. Retrofit strategies towards Net Zero Energy Educational Buildings: A case study at the University of the Basque CountryEnergy and Buildings, Vol. 144, pp. 387-400
  3. Prediction of pitting corrosion status of EN 1.4404 stainless steel by using a 2-stage procedure based on support vector machinesJournal of Chemometrics, Vol. 31, Núm. 12
  4. Prediction of carbon monoxide (CO) atmospheric pollution concentrations using meterological variablesWIT Transactions on Ecology and the Environment, Vol. 211, pp. 137-145
  5. New natural convection heat transfer correlations in enclosures for building performance simulationEngineering Applications of Computational Fluid Mechanics, Vol. 11, Núm. 1, pp. 340-356
  6. Influencia del caudal de ventilación e infiltración sobre la demanda energética en edificios residenciales en EspañaRevista DYNA, Vol. 92, Núm. 6, pp. 655-660
  7. Comparaison thermodynamique de cycles de refroidissement à éjecteur. Caractérisation d’éjecteur aux moyens du ratio d’entrainement et du rendement de compressionInternational Journal of Refrigeration, Vol. 74, pp. 369-382
  8. Characterizing the air temperature drop in Mediterranean courtyards from monitoring campaignsSustainability (Switzerland), Vol. 9, Núm. 8
  9. A new practical CFD-based methodology to calculate the evaporation rate in indoor swimming poolsEnergy and Buildings, Vol. 149, pp. 133-141

2016

  1. Time Analysis of the Containerized Cargo Flow in the Logistic Chain Using Simulation Tools: The Case of the Port of Seville (Spain)Transportation Research Procedia
  2. Short-term Forecasting of Intermodal Freight Using ANNs and SVR: Case of the Port of Algeciras BayTransportation Research Procedia
  3. ME3A: Software tool for the identification of energy saving measures in existing buildings: Automated identification of saving measures for buildings using measured energy consumptionsEEEIC 2016 – International Conference on Environment and Electrical Engineering
  4. The effect of evaporative cooling techniques on reducing urban heatUrban Climate Mitigation Techniques (Taylor and Francis Inc.), pp. 113-130
  5. The globe thermometer in comfort and environmental studies in buildingsRevista de la Construcción, Vol. 15, Núm. 3, pp. 57-66
  6. Reduction of computation time in building energy performance simulation programs by applying tearing techniquesEnergy and Buildings, Vol. 130, pp. 667-675
  7. Forecasting of short-term flow freight congestion: a study case of Algeciras Bay Port (Spain)DYNA: revista de la Facultad de Minas. Universidad Nacional de Colombia. Sede Medellín, Vol. 83, Núm. 195, pp. 163-172
  8. Estimating the temperature of the active layer of dye sensitised solar cells by using a “second-order lumped parameter mathematical model”Solar Energy, Vol. 137, pp. 80-89
  9. Applying the HVAC systems in an integrated optimization method for residential building’s design. A case study in SpainEnergy and Buildings, Vol. 119, pp. 74-84
  10. Analysis of the economic feasibility and reduction of a building’s energy consumption and emissions when integrating hybrid solar thermal/PV/micro-CHP systemsApplied Energy, Vol. 165, pp. 828-838
  11. A two-stage model based on artificial neural networks to determine pitting corrosion status of 316L stainless steelCorrosion Reviews, Vol. 34, Núm. 1-2, pp. 113-125
  12. A new analytical approach for simplified thermal modelling of buildings: Self-Adjusting RC-network modelEnergy and Buildings, Vol. 130, pp. 85-97
  13. A Hybrid Procedure for the Sequential Estimation of Surface Heat Flux From Measurements of Surface TemperatureHeat Transfer Engineering, Vol. 37, Núm. 16, pp. 1325-1340

2015

  1. Validación experimental de dos modelos híbridos de simulación de intercambiadores enterrados verticales para bombas de calor geotérmicasIX Congreso Nacional de Ingeniería Termodinámica: libro de actas : 3 al 5 de junio 2015 Cartagena (Universidad Politécnica de Cartagena), pp. 459-467
  2. Método explícito vs. implícito en la resolución del intercambio radiante de onda larga en simulación térmica de edificiosIX Congreso Nacional de Ingeniería Termodinámica: libro de actas : 3 al 5 de junio 2015 Cartagena (Universidad Politécnica de Cartagena), pp. 228-234
  3. Metodología para el cálculo de la tasa de evaporación en piscinas cubiertas mediante CFDIX Congreso Nacional de Ingeniería Termodinámica: libro de actas : 3 al 5 de junio 2015 Cartagena (Universidad Politécnica de Cartagena), pp. 684-691
  4. Comparativa de ciclos de refrigeración con compresión por eyector en términos del coeficiente de rendimiento. Caracterización del eyector mediante el ratio de entrada y la eficiencia de compresiónIX Congreso Nacional de Ingeniería Termodinámica: libro de actas : 3 al 5 de junio 2015 Cartagena (Universidad Politécnica de Cartagena), pp. 311-320
  5. Adaptación del método CTF a cerramientos con alta inercia térmicaIX Congreso Nacional de Ingeniería Termodinámica: libro de actas : 3 al 5 de junio 2015 Cartagena (Universidad Politécnica de Cartagena), pp. 599-607
  6. Pitting corrosion behaviour modelling of stainless steel with support vector machinesMaterials and Corrosion, Vol. 66, Núm. 9, pp. 915-924
  7. Numerical and experimental validation of a new hybrid model for vertical ground heat exchangersEnergy Conversion and Management, Vol. 103, pp. 511-518
  8. Influence of selected solar positions for shading device calculations in building energy performance simulationsEnergy and Buildings, Vol. 101, pp. 144-152
  9. Fitting conduction transfer function method to low Fourier numbers: application to ground-coupled floorsJournal of Building Performance Simulation, Vol. 8, Núm. 6, pp. 424-434
  10. Energy efficiency indicators for assessing construction systems storing renewable energy: Application to phase change material-bearing FaçadesEnergies, Vol. 8, Núm. 8, pp. 8630-8649
  11. Characterization of pitting corrosion of stainless steel using artificial neural networksMaterials and Corrosion, Vol. 66, Núm. 10, pp. 1084-1091
  12. A two-stage procedure for forecasting freight inspections at Border Inspection Posts using SOMs and support vector regressionInternational Journal of Production Research, Vol. 53, Núm. 7, pp. 2119-2130
  13. A novel three-step procedure to forecast the inspection volumeTransportation Research Part C: Emerging Technologies, Vol. 56, pp. 393-414
  14. A new RC and g-function hybrid model to simulate vertical ground heat exchangersRenewable Energy, Vol. 78, pp. 631-642

2014

  1. Hybrid approaches of support vector regression and SARIMA models to forecast the inspections volumeLecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
  2. A comparison of forecasting methods for Ro-Ro traffic: A case study in the strait of gibraltarAdvances in Intelligent Systems and Computing
  3. Ventilation and architectural design strategies for cooling office buildings in different climates of ChileProgress in Sustainable Energy Technologies Vol II: Creating Sustainable Development (Springer International Publishing), pp. 203-212
  4. Effect analysis of constructive quality and orientation on the energy consumption of the buildings in the North of MoroccoEnergy-Environment-Economics (Nova Science Publishers, Inc.), pp. 33-40
  5. Prediction of PM10 and SO2 exceedances to control air pollution in the Bay of Algeciras, SpainStochastic Environmental Research and Risk Assessment, Vol. 28, Núm. 6, pp. 1409-1420
  6. Potential of night ventilative cooling strategies in office buildings in Spain – Comfort analysisInternational Journal of Ventilation, Vol. 13, Núm. 2, pp. 193-210
  7. Pitting potential modelling of en 1.4404 stainless steelMaterials and Corrosion, Vol. 65, Núm. 9, pp. 881-890
  8. Hybrid approaches based on SARIMA and artificial neural networks for inspection time series forecastingTransportation Research Part E: Logistics and Transportation Review, Vol. 67, pp. 1-13
  9. Experimental analysis of hydroquinone used as phase change material (PCM) to be applied in solar cooling refrigerationInternational Journal of Refrigeration, Vol. 39, pp. 95-103
  10. Breakdown potential modelling of austenitic stainless steelJournal of Chemometrics, Vol. 28, Núm. 3, pp. 181-191
  11. An integrated optimisation method for residential building design: A case study in SpainEnergy and Buildings, Vol. 80, pp. 158-168
  12. An automatic pitting corrosion detection approach for 316L stainless steelMaterials and Design, Vol. 56, pp. 642-648
  13. A comprehensive approach based on SVM to model pitting corrosion behaviour of en 1.4404 stainless steelMaterials and Corrosion, Vol. 65, Núm. 10, pp. 1024-1032

2013

  1. Validez del modelo unidimensional transitorio para la transferencia de calor en contacto con el terrenoVIII Congreso Nacional de Ingeniería Termodinámica. [Recurso electrónico]: libro de actas
  2. Validación de un modelo RC de suelo radiante para programas de simulación térmica de edificiosVIII Congreso Nacional de Ingeniería Termodinámica. [Recurso electrónico]: libro de actas
  3. The influence of outer weather conditions on the modelling of vertical ground heat exchangersApplied Mechanics and Materials
  4. Estimating the influence of outdoor convective heat transfer coefficient on thermal loadsProceedings of BS 2013: 13th Conference of the International Building Performance Simulation Association
  5. Efecto de las condiciones climáticas en el modelado de intercambiadores enterrados verticales para bombas de calor geotérmicasVIII Congreso Nacional de Ingeniería Termodinámica. [Recurso electrónico]: libro de actas
  6. Efecto de la selección de posiciones solares para el cálculo de sombras en la simulación térmica de edificiosVIII Congreso Nacional de Ingeniería Termodinámica. [Recurso electrónico]: libro de actas
  7. Cálculo de coeficientes de película convectivos en el interior de edificios para convección forzada en modelos 3D a partir de modelos equivalentes 2DVIII Congreso Nacional de Ingeniería Termodinámica. [Recurso electrónico]: libro de actas
  8. Applicability of one-dimensional transient solutions for ground-coupled heat transfer in buildingsApplied Mechanics and Materials
  9. A constructive neural network to predict pitting corrosion status of stainless steelLecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
  10. Tightening the energy consumptions of buildings depending on their typology and on Climate Severity IndexesEnergy and Buildings, Vol. 58, pp. 372-377
  11. Thermal analysis of a ventilated facade with PCM for cooling applicationsEnergy and Buildings, Vol. 65, pp. 508-515
  12. Pitting potential modeling using Bayesian neural networksElectrochemistry Communications, Vol. 35, pp. 30-33
  13. Performance assessment of a simplified hybrid model for a vertical ground heat exchangerEnergy and Buildings, Vol. 66, pp. 437-444
  14. Mathematical modeling of a PCM storage tank in a solar cooling plantSolar Energy, Vol. 93, pp. 1-10
  15. Improving direct solar shading calculations within building energy simulation toolsJournal of Building Performance Simulation, Vol. 6, Núm. 6, pp. 437-448
  16. Experimental study of a ventilated facade with PCM during winter periodEnergy and Buildings, Vol. 58, pp. 324-332
  17. Building integration of PCM for natural cooling of buildingsApplied Energy, Vol. 109, pp. 514-522
  18. Analysis and repercussions of the updating of the spanish regulation regarding ventilation and infiltrationInternational Journal of Ventilation, Vol. 11, Núm. 4, pp. 407-416

2012

  1. Solar absorption in a ventilated facade with PCM. Experimental resultsEnergy Procedia
  2. Pitting corrosion detection of austenitic stainless steel EN 1.4404 in MgCl2 solutions using a machine learning approachAIP Conference Proceedings
  3. Pitting corrosion behaviour of austenitic stainless steel using artificial intelligence techniquesJournal of Applied Logic
  4. Passive downdraught evaporative cooling: Performance in a prototype houseBuilding Research and Information, Vol. 40, Núm. 3, pp. 290-304
  5. PHDC: sistemas de enfriamiento evaporativo, pasivos e híbridos para edificios � software de prediseñoRevista de la Construcción, Vol. 11, Núm. 2, pp. 73-91
  6. Natural ventilation: CFD aerodynamic study about passive extractor and windcatcherRevista Ingenieria de Construccion, Vol. 27, Núm. 1, pp. 40-56
  7. Fachadas ventiladas activas para reducir la demanda de calefacción en los edificios de oficinas. El caso de EspañaInformes de la construcción, Vol. 64, Núm. 528, pp. 575-585
  8. Effect analysis of constructive quality and orientation on the energy consumption of the buildings in the North of MoroccoInternational Journal of Energy, Environment and Economics, Vol. 20, Núm. 1, pp. 32-38
  9. Constructing HVAC energy efficiency indicatorsEnergy and Buildings, Vol. 47, pp. 619-629
  10. Climatic applicability of downdraught cooling in EuropeArchitectural Science Review, Vol. 55, Núm. 4, pp. 259-272

2011

  1. A review of HVAC systems requirements in building energy regulationsEnergy and Buildings, Vol. 43, Núm. 2-3, pp. 255-268
  2. Ventilated active façades to reduce the cooling demand of office buildings – The case of SpainInternational Journal of Ventilation
  3. Utilización del recurso «Teletipo Virtual» aplicado a la docencia de la asignatura de Ingeniería GeológicaXIX Congreso Universitario de Innovación Educativa en las enseñanzas Técnicas: libro de Resúmenes
  4. Uncertainty and sensibility analysis in building simulation: A probabilistic approach to the real estate market of apartments in Santiago de ChilePLEA 2011 – Architecture and Sustainable Development, Conference Proceedings of the 27th International Conference on Passive and Low Energy Architecture
  5. Prácticas de Innovación Educativa puestas en marcha para mejorar la asignatura de Materiales de la Construcción I del Grado en Ingeniería Civil de la Escuela Politécnica Superior de AlgecirasXIX Congreso Universitario de Innovación Educativa en las enseñanzas Técnicas: libro de Resúmenes
  6. Prediction of peak concentrations of PM10 in the area of Campo de Gibraltar (Spain) using classification modelsAdvances in Intelligent and Soft Computing
  7. Modificación de las pruebas prácticas de evaluación:: Modelado vs ResoluciónXIX Congreso Universitario de Innovación Educativa en las enseñanzas Técnicas: libro de Resúmenes
  8. La enseñanza de lenguas en el máster oficial de Modelado Computacional en Ingeniería de la Escuela Politécnica Superior de AlgecirasXIX Congreso Universitario de Innovación Educativa en las enseñanzas Técnicas: libro de Resúmenes
  9. Iniciativa docente innovadora en la asignatura de Técnicas de Modelado y Contaminación AtmosféricaXIX Congreso Universitario de Innovación Educativa en las enseñanzas Técnicas: libro de Resúmenes
  10. Experimental study of thermal energy storage rates in high temperature phase change systems for solar refrigeration30th ISES Biennial Solar World Congress 2011, SWC 2011
  11. Austenitic stainless steel en 1.4404 corrosion detection using classification techniquesAdvances in Intelligent and Soft Computing
  12. The map of energy flow in HVAC systemsApplied Energy, Vol. 88, Núm. 12, pp. 5020-5031
  13. Heat transfer and mass flow correlations for ventilated facadesEnergy and Buildings, Vol. 43, Núm. 12, pp. 3696-3703

2010

  1. Revision of the Trombe wall calculation method proposed by UNE-EN ISO 13790Energy and Buildings, Vol. 42, Núm. 6, pp. 763-773
  2. Transient heat conduction in multi-layer walls: An efficient strategy for Laplace’s methodEnergy and Buildings, Vol. 42, Núm. 4, pp. 541-546
  3. Simulation model for some types of double envelope elementsInternational Journal of Ventilation, Vol. 9, Núm. 3, pp. 227-239

2009

  1. A review of benchmarking, rating and labelling concepts within the framework of building energy certification schemesEnergy and Buildings, Vol. 41, Núm. 3, pp. 272-278
  2. Rentabilidad del cultivo de variedades de vid para la producción de holandas para Brandy de JerezNuevos horizontes en la viticultura y enología: X Congreso Nacional de Investigación Enológica. Ourense, del 3 al 5 de junio de 2009

2008

  1. Prediction of CO maximum ground level concentrations in the Bay of Algeciras, Spain using artificial neural networksChemosphere, Vol. 70, Núm. 7, pp. 1190-1195
  2. Prediction models of CO, SPM and SO2 concentrations in the Campo de Gibraltar Region, Spain: A multiple comparison strategyEnvironmental Monitoring and Assessment, Vol. 143, Núm. 1-3, pp. 131-146
  3. Climatic zoning and its application to Spanish building energy performance regulationsEnergy and Buildings, Vol. 40, Núm. 10, pp. 1984-1990

2007

  1. Flow pattern effects on night cooling ventilationInternational Journal of Ventilation
  2. Ayuntamiento de Encinas Reales, un edificio eficienteElectra, Núm. 141, pp. 36-55
  3. A single-thin-film model for the angle dependent optical properties of coated glazingsSolar Energy, Vol. 81, Núm. 8, pp. 969-976

2006

  1. The influence of injection timing over nitrogen oxides formation in marine diesel enginesJournal of Marine Environmental Engineering, Vol. 8, Núm. 4, pp. 299-308
  2. Multivariate statistical analysis of meteorological and air pollution data in the ‘Campo De Gibraltar’ Region, SpainEnvironmental Monitoring and Assessment, Vol. 119, Núm. 1-3, pp. 405-423
  3. Ayuntamiento de Encinas Reales: un edificio eficienteEl Instalador, Núm. 434, pp. 118-133
  4. A new methodology towards determining building performance under modified outdoor conditionsBuilding and Environment, Vol. 41, Núm. 9, pp. 1231-1238
  5. A competitive neural network approach for meteorological situation clusteringAtmospheric Environment, Vol. 40, Núm. 3, pp. 532-541

2005

  1. Solar radiation calculation methodology for building exterior surfacesSolar Energy, Vol. 79, Núm. 5, pp. 513-522

2004

  1. Modelling microclimate in urban environments and assessing its influence on the performance of surrounding buildingsEnergy and Buildings
  2. «SOLVENT»: Development of a reversible solar-screen glazing systemEnergy and Buildings
  3. The euroclass method – description of the softwareEnergy Performance of Residential Buildings: A Practical Guide for Energy Rating and Efficiency (James & James/Earthscan), pp. 71-77

2002

  1. Frecuencímetro virtual de precisión máxima automática: Diseño y ancho de bandaMundo electrónico, Núm. 330, pp. 48-52

2000

  1. Shear modulus G12 of unidirectional composites: A boundary element evaluationEngineering Analysis with Boundary Elements, Vol. 24, Núm. 4, pp. 351-356
  2. Comunicaciones móviles: Nuevos sistemas de seguridadMundo electrónico, Núm. 309, pp. 56-58

1998

  1. Apuntes de métodos numéricos en conducción de calorAlgeciras : Universidad de Cádiz, Departamento de Física Aplicada, 1998

1997

  1. Design methodology and cooling potential of the environmental heat sinksInternational Journal of Solar Energy, Vol. 19, Núm. 1-3, pp. 179-197

1996

  1. Complemento docente a la asignatura «Fundamentos físicos de la ingeniería»: simulación de sistemas físicos por ordenadorLa innovación educativa, motor del progreso: [actas del Congreso Universitario sobre innovación educativa en las enseñanzas técnicas]. Zaragoza 11, 12 y 13 de septiembre de 1996